Products

ColiMinder™ CMI-02 Emergency Response Unit

Product details

ColiMinder® CMI-02-ERU (Emergency Response Unit) provides the capability to measure microbiological contamination on the road taking sample from different sources or locations.

With a ColiMinder CMI-02-LE serving as base, the ERU is assembled on a rack and dedicated for mobile use or as a driving lab, e.g. in cars or on a boat.

It is equipped with batteries and all necessary equipment with consumables for 100 measurements. It can be deployed also for continuous monitoring when being equipped with different canisters.

Using integrated multisampling unit, ColiMinder can measure up to 10 samples one after the other on the way to the next sampling site.

ColiMinder® CMI-02-ERU has an internal 4G modem and can be powered by a 12V DC car system or any DC source between 12 and 30V DC. Solar panels or power packs can be directly connected.

features

E

Basic Principles

Fluorometric measurement technology

Reagents & Consumables

  • Two component measurement reagents
    (CM Quick Detect)
  • Cleaning solution (CM Quick Clean)
  • Rinsing water (not provided)
  • No contaminated or hazardous waste is produced
  • Reagents holding capacity: up to 100 measurements

Key Features

R

fully automated sampling, measurement, cleaning and calibration

R

Online data visualization and automatic notification

R

100 measurements without staff intervention

R

up to 54 (80 in special cases) measurements per day

R

Fully controllable through internet connection

R

10 sample intakes

Measurement Frequency

  • 15 min measurement time followed by a 9 min cleaning cycle
  • Continuous Mode: up to 54 measurements per day.
  • Interval Mode: time between the measurements can be set manually
    • Persistent Mode: Sample 1 to Sample 10
    • Alternating Mode: switching as requested between Sample 1 to Sample 10
    • The measurement process is a batch process.

For a short time, measurement frequency can be increased to approx. 80 measurements per day (with reduced cleaning).

Data transfer and visualization

Measurements data is directly transmitted to server through internet/ network connection

Live data visualization on dedicated website, results can be downloaded

Automatic notifications can be set (E-mail, SMS)

Measurement results are also available through RS232/RS485 or Modbus TCP (optional)

Measurement results can be saved on USB Flash Drive directly from the device

4 to 20 mA output optional

Remote control

All functions and programming can be performed through remote control (internet or network connection required). The ColiMinder® is able to control ISCO 6700 auto samplers, which also can be controlled remotely through ColiMinder® remote control.

Online visualization

Using this service, you are able to monitor status and results of your ColiMinder live and online on a dedicated homepage. Results are presented in a timeline and can be downloaded in csv or xls

Add-On Modules

10-fold multisampling module 50 ml bottles

sample line extension up to 10 intakes

ISCO Auto-Sampler Controller

To trigger and control ISCO 6700 auto sampler

10-fold multisampling module 250 ml bottles

sample line extension up to 10 intakes

Data Output Module 4-20 mA
Sampling Unit – sample from a stream

Necessary when sampling from a pressurized stream

Installation Rack

Tailor-made rack for installations on-site, including holdings for device, canisters, tablet

Connection Ports

WIFI

LAN

RS-232

USB

HDMI

Internal GPRS/LTE–Modem

AutoSampler Control Port

Alarm–Relay output or alarm flashlight

SpecificationS

Measurement time for quantitative results15 min.
Performance (measurements per day)Standard: up to 56 (1x cleaning) or up to 45 (2x cleaning)
Special case (with reduced cleaning): up to 80
Number of sample intakes10
Housing:IP 65 (powder coated aluminum)
Full working cycle incl. automatic cleaning< 30 min.
Power supplyInternal Battery Pack (included)
Power Supply 12V DC (included
12V car Adapter (included)
Solar Panel (12-30V, not included)
Space for device W x H x D60 cm x 70cm x 60cm
Dimensions W x H x D60 cm x 65cm x 60 cm
Weight35 kg
Detection limit (E.coli)0.8 mMFU/100ml
Detection limit (Enterococci)0.5 µGU/100ml
Detection limit (Total Bacteria)0.5 µU/100ml
Temperature range for operation0°C to 40°C
Reagent cooler0°C-20°C, 90W

Need further details? Send us a note!

For any other questions, please write us at office@v-w-m.at or call us on +43 2284 2018810